Specification Sheet

Page: 1
Larson Electronics LLC www.LarsonElectronics.com
9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]
Explosion Proof LED Drop Light / Trouble Light -10 Watt LED - 120V AC - 75 Foot SOOW Cord Exp. Plug
Part #: EHL-LED-7W-75-1523
Made in the USA
The Larson Electronics EHL-LED-7W-75-1523 Explosion Proof LED Drop Light / Trouble Light is U.L. approved Class 1 Division 1 & 2
Groups C and D - and is ideal for general work activities in hazardous locations requiring explosion proof protection.
This 10 watt explosion proof LED work light produces 1050 lumens of bright white light and comes complete with 75 feet of explosion proof cord.
The EHL-LED-7W-100-1523 LED drop light has no ballast and the housing is constructed of non sparking aluminum which results in a very
lightweight unit. This hazardous location hand lamp is Class 1, Division 1 and 2 and Class 2 Division 1 and 2 hazardous location environment
approved. This explosion proof LED drop light is ideal for hazardous work areas where a ready source of easily managed lighting is desired.
These particular units also come standard with an explosion proof twist-lock plug. The plug is Class 1, Division 1 & 2 and Class 2, Division 1 & 2
rated. In order to complete the seal, operator must take twist-lock explosion proof plug and connect to an explosion proof outlet receptacle.
Connecting to a regular 120VAC outlet renders the plug useless and should only be done when connecting the light outside of the explosion
proof environment.
100 Watt Incandescent Bulb With the EXP-LED-7W-75
Click Photos to Enlarge Click Photos to Enlarge Click Photos to Enlarge