Specification Sheet

Page: 2
Larson Electronics LLC www.LarsonElectronics.com
9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. As a result, many manufacturers reduce the
output of their LEDs to reduce the amount of heat produced. These LED light bars utilize an extruded aluminum housing that incorporates an
advanced heat radiating fin design which dissipates heat efficiently to produce the maximum amount of power and longevity from the integrated
Edison Edixeon® Emitters. The end result is more light and longer LED life with higher average lumen maintenance after 50,000 hours.
Voltage Control: These units are able to monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels
across a specific range. These LEDLB series light bars can operate on current ranging from 9 to 42VDC without any modifications necessary as
a result. This multi-voltage capability makes these units ideal for mobile and stand alone applications such as those found on boats, heavy
equipment and vehicles where power systems don’t always operate with 12 volts and external generators, transformers or inverters are
impractical.
Durability: The LEDLB-E series of LED light bars from Larson Electronics offer IP68 rated construction that is designed to withstand extremes of
environmental and operating conditions. The LED lights with the ‘E’ part number designation are designed for extreme durability and are larger
and nearly twice as heavy as their standard counterparts. These units can withstand rapid temperature changes of -40 degrees Celsius to 85
degrees Celsius, are waterproof to three feet and resist ingress of dust, dirt and humidity. The housings are formed from thick extruded aluminum
and the lenses are unbreakable polycarbonate. The Edixeon® LEDs offer inherent LED resistance to shocks and vibrations contributing to these
units 15.6Grms rating of vibration tolerance. We recommend these LED lights for high stress - high vibratory conditions, high humidity climates,
very cold areas and rough saltwater conditions. They are also well suited to environments where equipment is used in one temperature extreme
and stored in another temperature extreme.
Click here to view an article on the Generations of Night Vision and Infrared.
Note: Most Larson Electronics LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are terminated with a Deutsch
IPD / LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB and LED10W series lights ship with mating connector as
part of a harness or pigtail, depending on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED
lights (i.e. high/low beam, modulating, IR/Visible combos) will have different Deutsch connectors.