Specification Sheet

Page: 1
Larson Electronics LLC www.LarsonElectronics.com
9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]
120VAC LED Strobe Light - Permanent Mount - 18 LED Beacon - 50,000 Life Hours
Part #: LEDB-4-120VAC
Made in the USA
The Larson Electronics LEDB-4-120VAC Permanent Mount Beacon works on 120 VAC for operation with standard AC power. This LED
Beacon offers a choice of colors and is designed to provide a signal with a full 360 degrees of visibility.
This compact LED beacon contains an LED lamp assembly that produces 360° of brilliant light without the dark spots or uneveness of traditional
incandescent beacon lights. This LED beacon is available in a choice of white, blue, green, amber or red colors, and produces a signal that is
visible over a 360 degree range. This unit contains 3 modules, each containing 6 LEDs, that are specially mounted within a clear Fresnel lens to
produce a full 360 degrees of signal radiation when the unit is powered on.
This waterproof and shock resistant LED beacon produces a triple flash strobe pattern that makes it ideal for work, industrial, utility and security
applications. A cast aluminum base and rugged lens provides excellent durability and is resistant to vibration and impacts. This unit is mounted
via 3 simple screw holes located in the aluminum base and includes a gasket for secure placement. At only 2.8" Wide x 5.2" High and weighing
only 11oz, this LED strobe beacon provides excellent power and visibility in a very compact form factor.
This unit is powered via a 120 VAC power source. The beacon comes standard with a step down transformer that allows users to connect to
standard 120 VAC current to power the 12 VDC unit. We also supply 16' of cable with deutsche connecters at either end to allow placement of
strobe light at a different position than the transformer. Alternatively, operators can also connect the beacon straight to a 12 volt system, without
having to integrate the transformer into the setup, simply by disconnecting the transformer and running 12 VDC power directly to the fixture. A
seperate deutsche coonector for connecting to 12 VDC power sources is recommended for secure and easy conection.
Note: On this particular unit there is a pigtail attached to the LED light terminating in a 2 pin Deutsch plug. The transformer is connected via its
own included matching plug. We offer a variety of cords and plugs with cigarette plug adapters, battery clamps, and ring terminals for connection
to DC power sources. Contact us at [e-mail] to order alternate cords with this unit.