Specification Sheet

Page: 2
Larson Electronics LLC www.LarsonElectronics.com
9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]
Made in the USA
The LED10W-1SS-IR Infrared LED Strobe Light from Larson Electronics is multi-voltage capable and equipped with a 100 lbs grip
magnetic base and cigarette plug connector to produce a portable and easily deployed IR light source. 750Nm, 850Nm or 940Nm
versions.
This ultra compact, high powered infrared LED strobe light projects an 750Nm, 850nm or 940nm infrared light. Included with this IR LED light is 1
high-powered 3 Watt LED emitter potted into an aircraft grade aluminum chassis that is designed to protect the LED and dissipate heat. Even
after running for a several hours, the lenses are only mildly warm. This infrared LED strobe light can be powered on DC voltage ranging from 9-
48 Volts DC and is configured to flash 4 times per second (quad flash).
Click Photo to Enlarge Click Photo to Enlarge Click Photo to Enlarge
This fixture is 2 inches wide by 2 inches tall, by 2.5 inches deep and draws only 1/4 amp on 12 volts and puts out an infrared beam that reaches
125 feet. Mounting hardware includes a 100 pound grip 3.25 inch magnetic base, anti-vibration bushing and adjustable positioning brackets,
resulting in a total unit height of five inches.
The rugged aluminum extrusion housing on this unit provides optimum durability and heat dissipation. The IP67 ingress protection rated housing
makes this IR LED strobe light impenetrable to dust and submersible under water up to 3 meters. The unbreakable polycarbonate lenses are
housed by a 6061 aluminum face plate which doubles as a radiant heat sink to melt away snow and ice in frigid conditions. These LED lights are
certified to 6G RMS with vibration tests to ensure performance in high impact conditions.
The light terminates with a short pigtail with Deutsch connector. An included 8 foot straight cord connects the light to the control box and another
8 foot straight cord terminates in a cigarette plug. The control box features a 3 position toggle switch, for on, off and beaconing mode. Thus, this
LED IR strobe light can be used for continuous on or flashing mode with a toggle switch change. This light can also be ordered in 10 degree spot
mode for a longer, tighter more concentrated light beam or 35 degree flood mode to produce a wider beam spread closer to the unit.
Voltages: This unit is multi-voltage capable and automatically sense and adjusts incoming current to the correct levels. As a result, this unit can
be operated with voltages of 9 to 48 VDC without additional hardware.