Specification Sheet
Page: 1
Larson Electronics LLC www.LarsonElectronics.com
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: sales@LarsonElectronics.com
Static Conductive Duct - EPF-8P and EPF-10P Explosion Proof Blowers - 8 inch OD - 25 foot long -
Part #: EPF-8-D25
Explosion Proof Fan Duct - 25 foot Static Conductive Duct
Hazardous location areas require a static conductive duct (8 inches outside diameter X 25 feet). Static conductive duct lengths are
connected via aluminum couplers. You will need an aluminum coupler to connect 2 pieces of duct.
The duct consists of a single-ply polyester reinforced PVC vinyl fabric hose contruction with an extrernal wearstrip reinforced with a spring
steel wire helix. It is lightweight for blower applications and highly compressible. The retractability of the static conductive duct allows for
convenient storage and easy transport in a fraction of its fully extended length and has low friction loss. The wearstrip offers external
abrasion resistance, and is listed as YL 94 V-0 flame retardant. Ambient temperature ranges from -20 degrees to 180 degrees F.
Works with the EPF-8 and EPF-10P series of explosion proof blowers.
Click here to learn more about National Electrical Code Hazardous Location Classifications
Part #: EPF-8-D25 (45290)