User manual

KU3241 Installation
7
Please disconnect all powers inside the main frame
(including hard drives and CD-ROM). Test Run the
system for 20 mines, check if all parts are
correctly connected.
7.Running Test：
-STEP1-
-STEP2- -STEP3-
z Insert ATX jumper wire into the 4
th
and 6
th
socket of the power supply
connector of ATX-motherboard.
z Press the power button to start. The
pump will start operating after
started, which will slightly lower
the water level in the reservoir, then
fill in the reservoir with coolant.
z Loosen the nozzle socket plug of the
reservoir; pour in some coolant to
the water tank.