User manual

KU3241 Installation
6
-STEP1- -STEP2-
-STEP3- -STEP4-
-STEP5-
z First, set in the clamp on one end of the
tube, connect the tube with tubing
adapter, and use pliers to move the clamp
onto proper location.
z Allow the two internally connected
tubes to go through the holes on the
back of the housing.
z Connect the pump tubing adapter with
the tube, use pliers to move the clamp
onto proper location.
z Connect heat exhaust radiator tubing
adapter with the tube and use pliers
to move the clamp onto proper
location.
z Tube connection completed.