User manual

KU3241 Installation

1. Determine the length of the tube required between the Water-Blocks

before cutting and connecting the water lines.

2. The ends of the tube should be even and smooth, the tube should

be fixed to the bottom of the connecter to avoid leakage.

3. Avoid curving or bending of the tube, to allow coolant running

smoothly.

4. The order of tube connection does not affect the cooling effect.

5.Power Supply Connection：

-STEP1- -STEP2-

-STEP3-

6.Tube Connection：

z Connect the pump connector cable

onto the computer.

z Remove side panel, threat fan wiring

as shown on picture, screws on I/O

bracket until locked in.

z Connect the fan wiring with power

supply.