Assembly Instructions

Insert cam-locks (#B) into the pre-drilled holes along the sides of the
right side panel (#2). Insert wood dowels and pply glue (#I) onto the
wood dowels (#C). Then insert the right side panel (#2) onto the wood
dowels (#C) and cam-bolts (#A). The cam-bolts will be inserted into
the cam-locks (#B). Using a Phillips screw driver tighten the cam-locks
until you feel resistance. Over tightening the cam-locks may break them.
Insert cam-locks (#B) into the pre-drilled holes along the sides of the
left side panel (#1) and right side panel (#2). Insert wood dowels (#C)
and apply glue (#I) onto the wood dowels (#C). Then insert the left side
panel (#1) and right side panel (#2)onto the wood dowels (#C) and
cam-bolts (#A) located on the top and bottoms panels (#4,5). The cam-
bolts will be inserted into the cam-locks (#B). Using a Phillips screw
driver tighten the cam-locks until you feel resistance. Over tightening
the cam-locks may break them.