Assembly Instructions

TOP FRAME

1PC

SIDE PANEL

2PCS

STRETCHER

1PC

MIRRORED TOP

1PC

BOLT 1/4”x1-1/4”

4PCS

BOLT 1/4”x5/8”

8PCS

FLAT WASHER

4PCS

LEVELER

4PCS

ALLEN KEY

1PC

*** Do not tighten screws & bolts until the entire unit is completely assembled. ***

STEP 1

Attach side panel (2) to top

frame (1) using bolts (A) and

flat washer (C) as shown.

COFFEE TABLE

ASSEMBLY INSTRUCTIONS

PAGE 1
COFFEE TABLE ASSEMBLY INSTRUCTIONS 1 2 3 4 TOP FRAME 1PC SIDE PANEL 2PCS STRETCHER 1PC MIRRORED TOP 1PC A B C D E BOLT 1/4”x1-1/4” 4PCS BOLT 1/4”x5/8” 8PCS FLAT WASHER 4PCS LEVELER 4PCS ALLEN KEY 1PC *** Do not tighten screws & bolts until the entire unit is completely assembled. *** STEP 1 Attach side panel (2) to top frame (1) using bolts (A) and flat washer (C) as shown.
PAGE 2
STEP 2 Attach stretcher (3) to side panel (2) using bolts (B) with wrench (E). Then, attach leveler (D) to the bottom of side panel (2) as shown. STEP 3 Attach the assembled parts to mirrored top (4) using bolts (B) again. Tighten all bolts and carefully turn the assembled unit upright. Your mirrored cocktail table assembly is now complete. *Notice: Please adjust each leveler to make sure the table sits firmly on the ground.