Installation & Assembly
ASSEMBLING
ASSEMBLING
ASSEMBLING
ASSEMBLING &
&
&
& INSTALLATION
INSTALLATION
INSTALLATION
INSTALLATION INSTRUCTIONS
INSTRUCTIONS
INSTRUCTIONS
INSTRUCTIONS PRODUCT
PRODUCT
PRODUCT
PRODUCT
For
For
For
For Wall
Wall
Wall
Wall Mount
Mount
Mount
Mount Fixture
Fixture
Fixture
Fixture
WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER .
MOUNTING
MOUNTING
MOUNTING
MOUNTING THE
THE
THE
THE FIXTURE
FIXTURE
FIXTURE
FIXTURE
Installation (see fig.1)
1. Shut off the power at the circuit breaker and remove old
fixture, including the cross bar.
2. Attach the mo unting screw part way into the side hole of
the crook cross bar , then lock it securely with hex nut
until becoming .
3. Attach the cross bar to the junction box using two box
screws . The side of the cross bar marked
“
GND ” must face
out.
4. Follow wiring instructions carefully (see fig.2)
5. Attach the lamp body( A ) onto the junction box, aligning
screws on cross bar with mounting holes and lock it
securely with the ball nuts( D ).
6. Attach the glass shade( B ) on to the socket holder and using
the ring ( C ) by turning it clockwise until tight .
7. Install the light bulb
s
in accordance with the fixture
’
s
specifications. DO
DO
DO
DO NOT
NOT
NOT
NOT EXCEED
EXCEED
EXCEED
EXCEED THE
THE
THE
THE MAXIMUM
MAXIMUM
MAXIMUM
MAXIMUM
WATTAGE
WATTAGE
WATTAGE
WATTAGE
RATING!
RATING!
RATING!
RATING!
Wiring (see fig.2)
1. Connect the electrical wires as follows. Connect the
Black wire from the fixture to the black house (hot)
Wire. Connect the white wire from the fixture to the white
(neutral) house wire. Make sure all wire nuts are secured.
You
may wrap the connections with electrical tape. If
your outlet box has a ground wire (green or bare copper)
connect fixture
’
s
ground wire to it. Otherwise attach the
bare copper fixture wire to the green ground screw on the
mounting plate .
2.Tuck the wire connections neatly into the wall junction
box.
F ig.1
Supply Wire
Fixture Wire
Crossbar
Supply Ground Wire
Junction Box
Fixture Ground Wire
Hex Nut
Fig. 2
White or
HOUSE
Black
WIRES
(Hot)
Smooth
FIXTURE
WIRES
Black or
Ribbed
WIRES
FIXTURE
Bare Copper(Ground)
FIXTURE
WIRES
Copper
(Ground)
HOUSE
(Neutral)
WIRES
White
Bare
Green or
WIRES
HOUSE
Listed
U
L
R