Datasheet

Product Information
Page 3 of 4
ÖLFLEX® PLUG 540 P Connection Cable Valid: 07.02.2012
Technical Data
Core identification code
According to VDE 0293-308 (table T9)
Approvals
Cable ÖLFLEX® 540 P: VDE reg. no. 6583 -
300/500 VAC up to 1.0 mm²
VDE reg. no. 6584 - 450/750 VAC as from 1.5 mm²
Harnessed 2-pole cable with straight, moulded,
central contour plug without protective/earthing
contact/pins: Plug type certification and marking
licence DIN VDE 0620-1/DIN 49406-R
Harnessed 3-pole cable with straight, moulded,
splash water protected, central isolated ground plug
with double/outline protection/earthing contact by
means of ground pins: Plug type certification and
marking licence DIN VDE 0620-1/DIN
49441-R2/DIN 49441-2-AR2 in conjunction with
plug protection type/category IP 44
Specific insulation resistance
> 20 GOhm x cm
Conductor stranding
Fine wire according to VDE 0295 Class 5/ IEC
60228 Class 5
Minimum bending radius
Occasional flexing: 10 x outer diameter
Fixed installation: 4 x outer diameter
Nominal voltage
U0: 250 V AC
Test voltage
Assembly: 2000 V
ÖLFLEX® 540 P: 3000 V
Protective conductor
G = with GN-YE protective conductor
X = without protective conductor
Temperature range
Occasional flexing and fixed installation: -40 °C to +80 °C
Article List
Part
number
Number
of cores and mm²
per conductor
Cable
diameter (mm)
Length
(m)
Copper
index (kg/km)
1st option for DIN/VDE connector with type certification: 2-core ÖLFLEX(R) 540 P cable in conjunction with 2-pin,
straight, extruded, 16 A/250 Vac-to-ground DIN/VDE central contour plug without earthed contact according to DIN
VDE 0620-1/DIN 49406-R and with plug protection rating IP 20
73220842 2 X 1 7.0 2.0 38.4
73220843 2 X 1 7.0 3.5 67.2
73220844 2 X 1 7.0 5.0 96.0
73221558 2 X 1,5 8,4 2.0 58.0