Datasheet

Product Information
Page 2 of 4
ÖLFLEX® PLUG 540 P Connection Cable Valid: 07.02.2012
• Core insulation: TPE
• Outer sheath made of special polyurethane
• 1st end: Gated, straight contour or earthing-type plug
• 1st option for DIN/VDE connector with type certification: 2-core ÖLFLEX(R) 540 P cable in conjunction with 2-pin,
straight, extruded, 16 A/250 Vac-to-ground DIN/VDE central contour plug without earthed contact according to
DIN VDE 0620-1/DIN 49406-R and with plug protection rating IP 20
• 2nd alternative of DIN/VDE type certified plug: 3-core ÖLFLEX(R) 540 P cable in conjunction with 2-pole,
straight, moulded, splash water protected, central, 16A/250Vac-to-ground, isolated ground DIN/VDE plug with
double protection/earthing contact/pin system according to DIN VDE 0620-1/DIN 49441-R2/DIN 49441-2-AR2
and with plug protection type/category IP 44
• 2nd end: 30 mm dismantled, with protection sleeves for the ends of the conductor
Approvals
• The VDE type certification/marking approval refers to moulded DIN/VDE connectors. The related certifications
can be found in the grey “Technical data” box
• The VDE registration refers to the “ÖLFLEX® 540 P” cable from U.I. Lapp GmbH used for these piece good
assemblies
Product features
• Good resistance of the outer sheath to cutting and abrasion
• High resistance to oil, low temperatures, microbes and hydrolysis
• Special, flame-retardant polyurethane sheath compound
• The products shown are also available for Switzerland, Australia, Denmark, Italy and the UK without the
LAPP/ÖLFLEX name or LAPP certification on request. Please refer to our cable configuration tool, available
online at www.lappkabel.de, for more details