Datasheet

DATA SHEET
2170820
UNITRONIC
®
BUS PB FC 1X2X0,64
Valid from:
16.08.2012
prepared by:
PD-PNM
Document: DB2170820EN_2
Page 1 of 2
Cable design
Wire
Bare copper wire ø 0.65 mm (0,026 in)
Insulation of foamed Polyethylene (PE) with skin ø 2.55 mm (0,100 in)
Core
2 wires RD and GN twisted to a pair
Plastic tape, overlapped
Inner-Jacket Polyvinylchloride (PVC) ø 5.4 mm (0.213 in)
Alulaminated foil overlapped, applied longitudinally
Shield braiding of tinned copper wires 0.15 mm diameter
Coverage approx. 55% ø 6.2 mm (0,244 in)
Jacket
Polyvinylchloride (PVC) violet (VT)
Wall thickness approx. 0.9 mm ø (8.0 ±0.4) mm (0.315 ±0.016 in)
Marking: LAPP KABEL STUTTGART UNITRONIC
®
BUS L2/FIP FC UL/CSA
1 x 2 x 0,64 * (UL) CMG 60°C AWG22 (SHIELDED) E224252 * ROHS ART. 2170820
Electrical data at 20°C
Loop resistance ≤ 110 Ohm/km
Screen resistance ≤ 9,5 Ohm/km
Insulation resistance ≥ 16 GOhm*km
Characteristic impedance 3 - 20 MHz 150 ± 15 Ohm
31.25 – 38.4 KHz 185 ± 18,5 Ohm
9,6 KHz 270 ± 27 Ohm
Attenuation
16 MHz ≤ 42 dB/km
4 MHz ≤ 22 dB/km
38.4 kHz ≤ 4 dB/km
9.6 kHz ≤ 2.5 dB/km