Datasheet

DATA SHEET
2170476
ETHERLINE
®
H PiMF * *
4 x 2 x AWG22/1 CAT.7
Valid from:
02.12.2008
prepared by:
PD-AN Hans Euler
Document: DB2170476EN Page 2 of 2
Electrical data at 20°C
Loop resistance ≤ 118,2 Ohm/km
Signal run time ≤ 4.7 ns/m
Insulation resistance ≥ 5 GOhm*km
Capacitance at 800 Hz approx. 45 pF/m
Velocity of propagation nom. 79%
Characteristic impedance:
1 – 100 MHz 100 (±15) Ohm
100 - 500 MHz 100 (± 22) Ohm
Operating voltage (peak) ≤ 100V
Test voltage (wire/wire/screen rms 50Hz 1min) 700V
Frequency (MHz) 4 10 16 20 31.25 62.5 100
NEXT (dB) ≥ 78 78 78 78 78 75.5 72.4
Attenuation max.
(dB/100m)
(dB/100ft)
3.7
(1,13)
5.9
(1.80)
7.4
(2.26)
8.3
(2.53)
10.4
(3.17)
14.9
(4.54)
19.0
(5.79)
Frequency (MHz) 155 200 250 300 500 600
NEXT (dB) ≥ 69.5 67.9 66.4 65.2 61.9 60.7
Attenuation max.
(dB/100m)
(dB/100ft)
24.0
(7.32)
27.5
(8.35)
31.0
(9.5)
34.2
(10.4)
45.3
(13.8)
50.1
(15.3)
Other electrical requirements acc. to IEC 61156-5 Ed. 2
Mechanical and thermal characteristics
Conductor material acc. to DIN EN 13602 Cu-ETP-R460-P
Screen material acc. to DIN EN 13602 Cu-ETP-A013-C
Insulating material acc. to DIN EN 50290-2-23 (VDE 0819), table 2/B
Jacket material acc. to VDE 0207, compound type HM2
Flame retardant acc. to IEC 60332-3
Stripping of sheath: min. 5 N to max. 40 N at a length of 50 mm
Other characteristics:
RoHS compliant
Permissible temperature range: -25 °C (-13 °F) up to 80 °C (176 °F)
Min. bending radius allowed: single 10 x ø
Weight approx.: 99 kg/km (67 lb/1000 ft)