Datasheet

DATA SHEET
2170465
ETHERLINE
®
P PiMF * *
4 x 2 x AWG22/1 CAT.6a
Valid from:
02.12.2008
prepared by:
PD-AN Hans Euler
Document: DB2170465EN Page 2 of 2
Electrical data at 20°C
Loop resistance ≤ 118,2 Ohm/km
Signal run time ≤ 4.7 ns/m
Insulation resistance ≥ 5 GOhm*km
Capacitance at 800 Hz approx. 45 pF/m
Velocity of propagation nom. 79%
Characteristic impedance:
1 – 100 MHz 100 (±15) Ohm
100 - 500 MHz 100 (± 22) Ohm
Operating voltage (peak) ≤ 100V
Test voltage (wire/wire/screen rms 50Hz 1min) 700V
Frequency (MHz) 4 10 16 20 31.25 62.5 100
NEXT (dB) ≥ 71,3 65,3 62,2 60,8 57,9 53,4 50,3
Attenuation max.
(dB/100m)
(dB/100ft)
3,8
(1,16)
6,0
(1,83)
7,6
(2,32)
8,5
(2,59)
10,7
(3,26)
15,5
(4,72)
19,9
(6,07)
Frequency (MHz) 155 200 250 300 500
NEXT (dB) ≥ 47,4 45,8 44,3 43,1 39,8
Attenuation max.
(dB/100m)
(dB/100ft)
25,3
(7,71)
29,1
(8,87)
33,0
(10,1)
36,6
(11,2)
49,2
(15,0)
Other electrical requirements acc. to IEC 61156-5 Ed. 2
Mechanical and thermal characteristics
Conductor material acc. to DIN EN 13602 Cu-ETP-R460-P
Screen material acc. to DIN EN 13602 Cu-ETP-A013-C
Insulating material acc. to DIN EN 50290-2-23 (VDE 0819), table 2/B
Jacket material acc. to CENELEC HD22.10, compound type TMPU
Flame retardant acc. to IEC 60332-1-2
Oil resistant acc. to DIN EN 60811-2-1
Stripping of sheath: min. 5 N to max. 70 N at a length of 50 mm
Other characteristics:
RoHS compliant
Permissible temperature range: -40 °C (-40 °F) up to 80 °C (176 °F)
Min. bending radius allowed: single 10 x ø
Weight approx.: 91 kg/km (61 lb/1000 ft)