Datasheet
DATA SHEET
2170284
EtherLine
-P FLEX CAT. 5e 2 x 2 x 26AWG
valid from :
17.06. 2005
elaborated by:
TE-K: N. Ensslen / M. Herb
Document: DB2170284_2EN page 1 of 2
Nr.: 0019/0894
Application
EtherLine
-P FLEX CAT. 5e 2 x 2 x 26AWG is a flexible, CATEGORY 5 high speed data transmission cable
suitable for application in the industrial environments to connect the (FAST-) ETHERNET network with the field
bus level. It enables a through going communication from sensor–actuator–level to Internet.
This data cable meets the requirements of Standards EIA/TIA-568 TSB-36 and ISO/IEC 11801 „Generic Cabling
for Customer Premises“ for CLASS D Links. The high quality double screening ensures a high security during
data transmission in areas with electromagnetic fields. The PUR outer sheath is resistant against mineral oils,
fats, against abrasion and against atmospheric UV radiation.
The cable is designed for stationary applications in dry and wet rooms and also for outdoor use.
Connectors: RJ 45 e. g.: Type CAT. 5, Stewart Connector Nr. 943-SP-370808 SM2 (IP 20)
RJ 45 capsuled e. g.: RJ Lnxx, Woodhead Connectivity (IP 65/67)
Design
Conductor stranded bare copper wire, 26AWG; 0,14 mm
2
(7 x 0,16)
Insulation foam-skin Polyethylene, core diameter 1,0 mm
Stranding cores twisted to pairs, pairs twisted to cable core
Colour code pair 1 white/orange - orange
pair 2 white/green - green
Screening aluminium laminated plastic foil
braid of tinned copper wires, coverage 85 % ± 5
Sheath PUR, halogen free, flame retardant, water blue RAL 5021,
outer diameter approx. 5.6 mm
Marking on the sheath:
LAPP KABEL EtherLine
®
-P FLEX CAT. 5e 2 x 2 x 26AWG ROHS ART. 2170284
Electrical properties at 20°C
DC resistance (loop)
max.Ω/km
284
Insulation resistance
min. GΩxkm
5
Mutual capacitance at 800 Hz nom. nF/km
48
Impedance at 1.....100 MHz
Ω
100 ± 15