Datasheet

ManualsBrandsLAPPKABEL ManualsIndustrial Data CablesBus cable UNITRONIC® BUS 1 x 2 x 0.32 mm² Violet Sold per metre

U.I. Lapp

GmbH

DATA SHEET

UNITRONIC BUS PB A 1 x 2 x 0,64

DB2170219

valid from: 17.11.2011

Originator: RAWE/PDC

approved: HAPF/PDC

Document: DB2170219 page 1 of 2

PD 0019/2.2_11.10DE

Application

Data cable with UL- and CSA approval for the fieldbus-system PROFIBUS DP, PROFIBUS FMS, SIEMENS SIMATIC

NET (acc.

to DIN 19245, Teil 3 und EN 50170 Kabeltyp A) and for the fieldbus system FIP (Factory Instrumentation Protocol) as well as

for high performance data networks with 150 Ohms nominal impedance. The cable is designed for the system-defined

transmission rates of 1.5 Mbit/s, 2.5 Mbit/s and 12 Mbit/s, the transmission characteristics conform to the system and

guarantee a high operating security during data transmission. It is suitable for interfaces RS 422 and RS 485.

The cable is intended for permanent installation in dry and damp interiors. With the double screening the cable is suitable for

installation in electromagnetic demanding areas.

Approval: UL /

UL Type CMX acc. to UL 444 and CSA C22.2 No. 214-08

Design

Conductor bare copper, nom. 0.64 mm Ø (22 AWG)

Insulation

Skin-Foam-Skin PE, core ∅ nom. 2.55 mm

Core identification code cores red and green

Stranding 2 cores together with 2 fillers

Wrapping 1 layer plastic-foil

Screening plastic-laminated aluminium foil, side with metal outwards, braid of tinned

copper wires, coverage min. 80%

Outer sheath PVC, violet similar to RAL 4001, wall thickness nom. 1.0 mm,

outer diameter: max. 8.0 mm

Electrical properties at 20° C

Resistance (loop) max. 115 Ω/km

Insulation resistance min. 5 GΩxkm

Mutual capacitance ca. 28 nF/km

(at 800 Hz)

Inductance ca. 0.83 mH/km

(at 800 Hz)

Characteristic impedance 9.6 kHz: 270 Ω ± 27

38.4 kHz: 185 Ω ± 18.5

3 bis 20 Mhz: 150 Ω ± 15

Line attenuation 9.6 kHz: max. 0.25 dB/100 m

38.4 kHz: max. 0.4 dB/100 m

200 kHz: max. 0.9 dB/100m

4 MHz: max. 2.2 dB/100 m

16 MHz: max. 4.2 dB/100 m

Velocity of propagation nom. 81%

Transfer impedance up to 20 MHz max. 5 mΩ/m

Operating peak voltage 225 V (not for power purposes)

Test voltage U

eff.

core/core und

core/screen

1500 V

Summary of content (2 pages)

PAGE 1
U.I. Lapp GmbH DATA SHEET UNITRONIC BUS PB A 1 x 2 x 0,64 DB2170219 valid from: 17.11.2011 Application ® Data cable with UL- and CSA approval for the fieldbus-system PROFIBUS DP, PROFIBUS FMS, SIEMENS SIMATIC NET (acc. to DIN 19245, Teil 3 und EN 50170 Kabeltyp A) and for the fieldbus system FIP (Factory Instrumentation Protocol) as well as for high performance data networks with 150 Ohms nominal impedance. The cable is designed for the system-defined transmission rates of 1.5 Mbit/s, 2.
PAGE 2
U.I. Lapp GmbH DATA SHEET UNITRONIC BUS PB A 1 x 2 x 0,64 DB2170219 valid from: 17.11.2011 Mechanical and thermal properties Minimum bending radius 10 x cable-diameter Permissible temperature range -40˚ C up to +80˚ C Flame propagation flame retardant acc. to IEC 60332-1-2/UL 1581 VW-1 Halogen free acc. to VDE 0472-815 general requirements Dangerous and forbidden substances acc. to RoHS directive (2002/95/EG) are not allowed to the manufacturing.