Datasheet

DATA SHEET
0167514
IEC extension cable KE 9 L-SY 2x1,5
valid from :
01.12.2008
Originator: Frank Hörtnagl / PD-KL
Approved: Werner Körner / TE
Document: DB0167514EN page 1 of 1
All deviations from this specification are subject to explicit consent of U.I.LAPP GmbH. All rights reserved acc. to DIN 34.
No.: 0019/0408
Application
The extension cable KE 9 L-SY 2 x 1,5 mm² is a PVC insulated cable with steel wire armouring which transmits
the thermoelectric voltage of Fe/CuNi thermocouples. It is for flexible use and fixed installation in dry and damp
rooms with medium mechanical load. They may only be installed outdoors with UV protection and in observation
of the max. permitted temperature range.The steel wire armouring serves as mechanical protection.
Design
Conductor 1,5 mm² (48 x 0,20 mm)
Conductor material JX alloying, accuracy class 2 according IEC 60584
Positive conductor: Fe (iron)
Negative conductor: CuNi (cupronickel)
Core insulation PVC compound
Core identification Positive conductor: black
Negative conductor: white
Core layering Cores twisted together
Inner sheath PVC compound, colour: black
Armouring Galvanized steel wire braiding
Outer sheath PVC compound, colour: black
Electrical properties
Limiting deviation class 2 ± 140 µV (± 2,5 °C) / m easuring point temperature +500 °C
Mechanical and thermal properties
Temperature range occasional flexing: -5 °C up to +70 °C
Minimum bending radius occasional flexing: 15 x cable diameter
Flammability flame retardant in acc. to IEC 60332-1-2 resp. VDE 0482-332-1-2