Datasheet

DATA SHEET
0154014
DIN compensating cable KP 20 L 2x1,5
valid from :
01.12.2008
Originator: Frank Hörtnagl / PD-KL
Approved: Werner Körner / TE
Document: DB0154014EN page 1 of 1
All deviations from this specification are subject to explicit consent of U.I.LAPP GmbH. All rights reserved acc. to DIN 34.
No.: 0019/0408
Application
The compensating cable KP 20 L 2 x 1,5 mm² is a PVC insulated cable with aluminium foil screen which
transmits the thermoelectric voltage of PtRh/Pt thermocouples. It is for flexible use and fixed installation in dry
and damp rooms with medium mechanical load. They may only be installed outdoors with UV protection and in
observation of the max. permitted temperature range. The overlapping foil wrapping screens the cores against
electromagnetical interference.
Design
Conductor 1,5 mm² (48 x 0,20 mm)
Conductor material RCB/SCB alloying, accuracy class 2 according DIN 43722
Positive conductor: Cu (copper)
Negative conductor: CuNi (cupronickel)
Core insulation PVC compound
Core identification Positive conductor: red
Negative conductor: white
Core layering Cores twisted together
Screening aluminium cladded plastic foil with tinned copper drain wire (7x0,30 mm)
Outer sheath PVC compound, colour: white
Electrical properties
Limiting deviation class 2 ± 60 µV (± 5,0 °C) / me asuring point temperature +1000 °C
Mechanical and thermal properties
Temperature range occasional flexing: -5 °C up to +70 °C
Minimum bending radius occasional flexing: 15 x cable diameter
Flammability flame retardant in acc. to IEC 60332-1-2 resp. VDE 0482-332-1-2