Datasheet

U.I. Lapp
GmbH
DATA SHEET
ÖLFLEX
®
SERVO 2YSLCY-JB
DB 0036425
valid from: 2014-06-23
Originator: KASC / PDC
approved: HAPF / PDC
Document: DB0036425EN
page 2 of 3
All rights reserved acc. to DIN ISO 16016.
PD 0019/2.2_11.10EN
Electrical properties
Nominal voltage U
0
/U 600 / 1000 V
Test voltage core/core, core/screen 4000 V AC
Specific insulation resistance > 20 G Ω x cm
Surface transfer impedance at 30 MHz ≤ 250 Ω / km
Mechanical and thermal properties
Min. bending radius occasional flexing: 15 x outer diameter
fixed installation: 4 x outer diameter
Temperature range Type “a”, 2YSLCY:
occasional flexing -5 °C up to +70 °C max. conductor temperature
fixed installation -40 °C up to +70 °C max. conductor temperature
Type “b”, 2YSLCYK:
gelegentlich bewegt -15 °C bis +70 °C max. conductor temperature
fest verlegt -40 °C bis +70 °C max. conductor temperature
Type “c”, 2YSLCY-JB BK:
occasional flexing: - 5 °C up to +70 °C max. conductor temperature
fixed installation -40 °C up to +70 °C max. conductor temperature
Flammability flame retardant acc. to IEC 60332-1-2 resp. VDE 0482-332-1-2
UV-resistance Type „b“ and „c“ acc. to EN 4892-2-2006, method A (change of colour allowed)
EN 50525-1 resp. VDE 0285-525-1,
cables with black sheath are suitable for a permanent
outdoor use
Tests acc. to IEC 60811 resp. VDE 0473, VDE 0472, EN 50395, EN50396
EC Directives This cable is conform to the EC-Directives 2006/95/EC (Low Voltage Directive)
and 2011/65/EG (RoHS, Restriction of the use of certain hazardous substances).