Datasheet

ManualsBrandsLAPPKABEL ManualsIndustrial Data CablesServo lead ÖLFLEX® SERVO FD 796 CP 4 G 2.5 mm² Orange Sold per metre

U.I. Lapp

GmbH

DATA SHEET

ÖLFLEX

SERVO FD 796 CP

DB 0027950

valid from: 16.04.2012

Originator: HESC / PDC

approved: HAPF / PDC

Document: DB0027950EN Page 1 of 3

PD 0019/2.2_11.10EN

Application

ÖLFLEX



SERVO FD 796 CP cables are high-flexible, screened, oil-resistant, halogen free, low capacitance servo motor ca-

bles with an outer sheath of Polyurethane. They are designed for use in high-dynamic applications with acceleration up to 50

m/s² in power chains as well as for fixed installation subject to medium mechanical load conditions. They are among others

designed for use in dry, damp and wet conditions. Outdoor use: They may only be installed considering the indicated tem-

perature range. ÖLFLEX



SERVO FD 796 CP cables are increased oil resistant and at room temperature widely resistant to

acids and caustic solutions. The outer sheath is resistant to high mechanical load, particularly to abrasion and scouring, is

cut resistant, microbe-proof and hydrolysis resistant. Usage on cable drums or pulleys or under a tensile strain of more than

20 N/mm² conductor cross-section is not allowed. The screen is a protection against electrical interference, the data pairs

are additionally screened.

Application range:

Connecting cable between servo controller and motor, in power chains or moving machine parts, for use in assembling- &

pick-and –place machines, machine tools and transfer lines, for assembly lines, production lines in all kind of machines.

Use acc. to UL: PUR sheathed cable for external wiring of electronic equipment.

Use acc. to CSA: PUR sheathed cable for external wiring of electronic equipment

with or without mechanical load conditions.

Design

Design according to UL AWM 758, Style 20234 and based on EN 50525-2-21 resp.

VDE 0285-2-21

Conductor extra fine wire strands of bare copper acc. to IEC 60228 resp. VDE 0295, Class 6

Core insulation PP Polypropylen

Core identification power conductors:

U/L1/C/L+; V/L2; W/L3/D/L-; GN/YE ground conductor

signal pairs:

1 pair: WH; BK

2 pairs: BK with WH numbers 5-8 acc. to VDE 0293-334

signal pairs with different conductor cross-section:

1 mm²: BK with WH numbers 5-6

1.5 mm²: BK with WH numbers 7-8

Pair shield signal pairs:

1 pair: Braid of tinned copper wires, coverage = 85% (nominal value)

2 pairs: Aluminium-laminated foil, drain wire, braid of tinned copper wires,

coverage = 85% (nominal value)

Cable make-up 4 power conductors (optionally with 1 resp. 2 signal pairs) in common stranded

with filler cords

Screen braid of tinned copper wires, coverage = 85% (nominal value)

Outer sheath Polyurethane-compound TMPU acc. to EN 50363-10-2 resp. VDE 0207-363-10-2

UL AWM 758, CSA AWM C22.2 No.210-05

Colour: Orange, similar RAL 2003

Summary of content (3 pages)

PAGE 1
U.I. Lapp GmbH DATA SHEET ÖLFLEX® SERVO FD 796 CP DB 0027950 valid from: 16.04.2012 Application ÖLFLEX SERVO FD 796 CP cables are high-flexible, screened, oil-resistant, halogen free, low capacitance servo motor cables with an outer sheath of Polyurethane. They are designed for use in high-dynamic applications with acceleration up to 50 m/s² in power chains as well as for fixed installation subject to medium mechanical load conditions.
PAGE 2
U.I. Lapp GmbH DATA SHEET ÖLFLEX® SERVO FD 796 CP DB 0027950 valid from: 16.04.2012 Electrical properties Nominal voltage VDE U0/U: UL/CSA: 600/1000 V max. 1000 V Test voltage Core/Core: 4000 V AC Core/Screen: 4000 V AC Pairscreen/overal screen: 500 V AC Transfer impedance at 30 MHz max. 300 mΩ/m Mutual capacity at 800 Hz 1.5 – 6 mm²: C/C max. 150 pF/m 10 – 50 mm²: C/C max. 300 pF/m Mechanical and thermal properties Min. bending radius flexing < 16 mm²: flexing > 25 mm²: fixed installation: 7.
PAGE 3
U.I. Lapp GmbH DATA SHEET DB 0027950 ÖLFLEX® SERVO FD 796 CP valid from: 16.04.2012 Table A 1.0 mm² - 16 mm² Acceleartion max. [ m / sec2 ] 60 50 40 30 20 10 0 0 3 5 10 15 20 25 30 35 40 45 50 Travel length [ m ] travel lenght acceleration [m] 0 3 5 10 15 20 25 30 35 40 45 50 100 [ m / sec ] 50 50 30 15 8 5 4 3 2 2 2 1.5 1.0 travel lenght acceleration [m] 0 3 5 7.5 10 12.5 15 17.5 20 [ m / sec2 ] 50 50 30 12 10 8 7 6 5 2 Acceleration max.