Datasheet

U.I. Lapp
GmbH
DATA SHEET
SERVO LK SMS FX8PLUS SIGNAL
DB 00277101EN
valid from: 30.03.2011
Originator: H. Huber / PCM
approved: H. Pfeffer/ PDC
27.8.2011: V3_Correction: V Huber
Document: DB00277101EN_V3 page 3 of 7
All deviations from this specification are subject to explicit consent of U.I. Lapp GmbH. All rights reserved acc. to DIN 34.
PD 0019/2.1_11.09EN
Impedance (3MHz) per pair: 100 Ohm +/- 10%
Shield transfer impedance: 0.01 MHz to 4 MHz: ≤ 20 mOhm/m
10 MHz: ≤ 50 mOhm/m
30 MHz: ≤ 150 mOhm/m
_________________________________________________________________________
Add-on for P/N 00277111 4 x 2 x 0.34 + 4 x 0.5 C
Element 1 4 x 2 x 0.34mm²
Pair ID code Brown + black, red + orange, yellow + green, blue + violet
Element 2 4 x 0.5mm²
Cond. ID code White/blue, white/black, white/red, white/yellow
Overall screen Tinned copper braid, optical coverage ≥ 80%
Outer diameter Approx. 8.9mm
Electrical characteristics (at 20°C):
Conductor resistance: 0.34mm²: ≤ 58.6 Ohm/km
0.5mm²: ≤ 43.3 Ohm/km
Test voltage: 500Vrms x 1min, C/C & C/S
Insulation resistance ≥ 1000 M Ohm x km, resp. 10MOhm x km at 80°C
Capacitance (800-1200Hz): pairs 0.34mm²: 70 +/- 20pF/m
Impedance (3MHz): pairs 0.34mm²: 90 Ohm +/-10%
Shield transfer impedance 0.01 MHz to 4 MHz: ≤ 20 mOhm/m
10 MHz: ≤ 50 mOhm/m
30 MHz: ≤ 150 mOhm/m
_________________________________________________________________________
Add-on for P/N 00277121 3 x (2 x 0.14) + 2 x (0.5) C
Element 1 3 x (2 x 0.14mm²)D:
Pair ID code Yellow + green, black + brown, red + orange
Pair shield: Spiral/wrap made of tinned cooper wires – Covering ≥ 90%
Stranded drain wire
Pair jacket: Polyolefine, black
Element 2 2 x (0.5mm²)D conductors:
0.5mm² cond. ID code Black, red
0.5mm² cond. screen Spiral/Wrap made of tinned copper wire – Covering> 90%
0.5mm² single jacket: Polyolefine, black