Datasheet

ManualsBrandsLAPPKABEL ManualsIndustrial Data CablesControl wiring ÖLFLEX® CLASSIC 191 5 G 1.5 mm² Grey 75 m

DATA SHEET

0011113

ÖLFLEX

191

valid from :

16.01.2006

elaborated by:

TE-K: M. Herb

Document: DB0011113_2EN page 1 of 1

Nr.: 0019/0894

Application

ÖLFLEX



191 cables are oil resistant control cables for the European, Northern American and Canadian market

for flexible use and fixed installation for middle mechanical abuse. For use in machine tools, conveyor lines and

production lines. They are for use in dry, damp and wet rooms. They may only be installed outdoors with UV-

protection and in observation of the temperature range.

Continuous, busy movements, usage of these cables in moving cable carriers, respectively on motor drum

guidance or under a strain of more than 15 n/mm² is not allowed. ÖLFLEX



191 cables are increased oil resistant

and at room temperature generally resistant against acids and caustics solutions.

USE according to UL: PVC-sheathed cables for external interconnection or internal wiring of electronic

equipment.

USE according to CSA: cables for internal or external interconnection with or without mechanical abuse.

Technical data

Conductor: bare copper, fine wire strand

Conductor resistance in acc. to UL, CSA and VDE/IEC

Design in acc. to UL AWM, CSA-C 22.2 No. 210.2, in support to VDE 0281 part 13

Core Insulation PVC-compound / UL-Class 43 and CSA-90° C

Identification in acc. to HD 186 that is VDE 0293, black cores with

white numbers with or without green/yellow ground conductor

Outer sheath PVC-compound / UL-Class 43 and CSA-90° C

Nominal voltage UL/CSA: 600 V

EU/IEC: U

/U: 300/500 V

Test voltage 3000 V AC

Temp. range for flex. use -5 up to +70°C (VDE) and +90°C(UL/CSA) max. conductor

temperature

fixed installation -40 up to +70°C (VDE) and +90°C(UL/CSA) max.

conductor temperature

Min. bending radius flex. use 15 x cable diameter

fixed installation 6 x cable diameter

Flame retardant vertical flame test in acc. to UL 1581 § 1061,

CSA FT1, IEC 60 332.1, that is VDE 0482 part 265-2-1

Oil resistance in acc. to VDE 0473 part 811-2-1,

UL 1581 class 43, CSA C 22.2 No. 210.2

Approvals UL AWM Style 21098 or 2587 (File No. E 63634)

CSA AWM I A/B II A/B (File No. LL 53776)

Designation of approval is printed on the cable sheath.

EC directive This cable confirms to ECD 73/23/EEC (low voltage directive).