Datasheet

PRODUCT INFORMATION
UNITRONIC® FD P plus
Highly flexible data cable with PUR outer sheath, meets the highest service life requirements, even under harsh climatic
conditions
Suitable for use in measuring, control and regulating circuits
Drag chain use - in case of horizontal installation travel distances up to 100 m
For use in chain/carrier: Please respect the assembly guidelines listed in Appendix T3
Product features
PUR outer sheath, tear and notch-resistant, resistant to mineral oils and abrasion when used in power chains
Flame retardance ratings: IEC 60332-1-2, FT2 (Horizontal flame test)
Halogen-free, has low capacitance and is flexible down to -40°C
Oil-resistant
Low-adhesive surface, resistant to hydrolysis and microbes, oil resistant
Norm references / Approvals
Based on VDE 0812
cRUus AWM certified by UL (UL: E63634): UL AWM Style 21576 and AWM A/B I/II
Product Make-up
Extra-fine wire strand made of bare copper wires
Core insulation: Based on Polyolefin
Non-woven wrapping
Outer sheath made of special PUR compound
Outer sheath colour: grey (RAL 7001)
Technical Data
Classification ETIM 5: ETIM 5.0 Class-ID: EC000830
ETIM 5.0 Class-Description: Data cable
Classification ETIM 6: ETIM 6.0 Class-ID: EC000830
ETIM 6.0 Class-Description: Data cable
Core identification code: DIN 47100, refer to Appendix T9
Mutual capacitance: C/C approx. 60 nF/km
Inductivity: approx. 0.65 mH/km
Conductor stranding: Stranded, extra-fine wire
Minimum bending radius: Flexing: 5 x outer diameter
Fixed installation: 3 x outer diameter
Test voltage: 1500 V
Temperature range: Flexing: -40°C to +80°C
Fixed installation: -40°C to +80°C
cRUus AWM: max. +80°C
Note
Unless specified otherwise, the shown product values are nominal values. Detailed values (e.g. tolerances) are available upon
request.
Copper price basis: EUR 150/100 kg. Refer to catalogue appendix T17 for the definition and calculation of copper-related
surcharges.
Please find our standard lengths at: www.lappkabel.de/en/cable-standardlengths
Packaging size: coil ≤ 30 kg or ≤ 250 m, otherwise drum
Please specify the preferred type of packaging (e.g. 1 x 500 m drum or 5 x 100 m coils).
Photographs and graphics are not to scale and do not represent detailed images of the respective products.
Last Update (26.09.2019) 2 / 4
©2019 Lapp Group - Technical changes reserved
Product Management www.lappkabel.de
You can find the current technical data in the corresponding data sheet.
PN 0456 / 02_03.16