Data Sheet
DATA SHEET
CE217489
ETHERLINE® FD P BK CAT.5 4 x 2 x AWG26/19
Valid from :
02.02.2011
PNM - Jennifer Lehmann Document: DBCE217489DE.doc Blatt 1 von 2
©2009 Lapp Group Technical changes reserved.
Application
ETHERLINE® FD P BK CAT. 5 4 x 2 x AWG26/19 is a CATEGORY 5 high speed data transmission cable
suitable for application in the industrial environments. It is made of halogen free materials.
This data cable meets the requirements of standards EIA/TIA-568, TSB-36 and ISO/IEC IS 11801 „Generic
Cabling for Customer Premises“ for CLASS D Links.
The high quality screen ensures high transmission reliability of data transfer in electromagnetically polluted areas.
The PUR outer sheath is very resistant against mineral oils and fats, against abrasion and atmospheric UV
radiation. The cable is intended for highly flexible applications in power chains or permanently moving machines
and linear robots in dry and damp interiors and in harsh industrial environment.
Connector RJ45 connector, TM21 Hirose, beige (# CE6324)
RJ45 connector FM45 (# 21700540)
Design
Conductor wire strands of bare copper, nom. 0,15 mm
2
(19x 0,10), (26AWG)
Core insulation Foam- Skin Polyetyhlen, Ø1,0 mm (RJ45 compatible)
Stranding 2 cores twisted to pairs, all pairs are together in a central synthetic filler
Color of cores white-blue, blue, white-orange, orange, white-green, green, white-brown, brown
Inner sheath halogen free TPE, nom. Ø 5,1mm
Screen braid of tinned copper wires, coverage 85% ( 5%)
Outer sheath ETHER PUR (halogen free),
color: black
outer diameter max. 6,3 mm, nom.
Labeling
LAPP KABEL ETHERLINE® FD P BK CAT. 5 4 x 2 x AWG 26/19 ART. CE217489
Electrical characteristics at 20°C
Loop impedance
max./km
284
Insulation resistance
min. Gxkm
5
Mutal capacitance at 800
Hz nom. nF/km
48
Characteristic impedance 1 up to 100
MHz
100 ± 15
Nominal Velocity of Propagation nom.
0,72c
Signal propagation delay
nom. ns/m
≤ 5,2
Run time difference (delay skew) nsec./m max.
≤0,4
Transfer impendance 1,10,30
MHz
max. m/m
35,200,500
Operating peak voltage (not for purposes of power) Peak value V
125
Test voltage Core/core U
eff.
V
1000
Core/screen U
eff.
V
700