Data Sheet

DATA SHEET
2170891
ETHERLINE
®
Y UL/CSA
Cat.
5e
2x2xAWG22/1
Valid from:
02.02.2009
prepared by:
PD-AN Peter Lintfert
Document: DB2170891EN Page 2 of 2
Electrical data at 20°C
Loop resistance ≤ 118,2 Ohm/km
Signal run time ≤ 5,3 ns/m
Insulation resistance ≥ 5 GOhm*km
Capacitance at 800 Hz nom. 48 pF/m
Velocity of propagation nom. 66%
Characteristic impedance:
4 – 100 MHz 100 (±15) Ohm
Operating voltage (peak) ≤ 125V
Test voltage (wire/wire rms 50Hz 1min) 1000V
Test voltage (wire/screen rms 50Hz 1min) 500V
Frequency (MHz) 4 10 16 20 31.25 62.5 100
NEXT (dB) ≥ 56,3 50,3 47,2 45,8 42,9 38,4 35,3
Attenuation max.
(dB/100m)
(dB/100ft)
4,1
(1,25)
6,5
(1,98)
8,3
(2,53)
9,3
(2,83)
11,7
(3,57)
17,0
(5,18)
22,0
(6,71)
Other electrical requirements acc. to IEC 61156-5 Ed. 2
Mechanical and thermal characteristics
Conductor material acc. to DIN EN 13602 Cu-ETP-R460-P
Screen material acc. to DIN EN 13602 Cu-ETP-A013-C
Insulating material acc. to DIN EN 50290-2-23 (VDE 0819), table 1, compound type L/MD
Jacket material acc. to CENELEC HD21, compound type TM2
Flame retardant acc. to IEC 60332-1-2, VW-1 acc. to UL1581
Stripping of sheath: min. 5 N to max. 40 N at a length of 50 mm
Other characteristics:
RoHS compliant
Permissible temperature range: -40 °C (-40 °F) up to +75 °C (167 °F)
During installation: -5 °C (23 °F) up to +50 °C (122 °F)
Min. bending radius allowed: repeated 7,5 x ø, single 3 x ø
Fire load 664 kJ/m
PVC weight with Phthalate: 21,6 kg/km(14,8 lb/1000 ft)
PVC weight without Phthalate: 0,0 kg/km
Weight approx.: 56 kg/km (38 lb/1000 ft)