Datasheet

DATA SHEET
0152022
DIN compensating cable KN 15 L-SIL 2x1,5 round
valid from :
01.12.2008
Originator: Frank Hörtnagl / PD-KL
Approved: Werner Körner / TE
Document: DB0152022EN page 1 of 1
All deviations from this specification are subject to explicit consent of U.I.LAPP GmbH. All rights reserved acc. to DIN 34.
No.: 0019/0408
Application
The compensating cable KN 15 L-SIL 2 x 1,5 mm² is a silicone insulated cable which transmits the
thermoelectric voltage of NiCr/Ni thermocouples. It is for flexible use and fixed installation in dry and damp rooms
without mechanical load. They may only be installed outdoors with UV protection and in observation of the max.
permitted temperature range.
Design
Conductor 1,5 mm² (48 x 0,20 mm)
Conductor material KCA alloying, accuracy class 2 according DIN 43722
Positive conductor: Fe (iron)
Negative conductor: CuNi (cupronickel)
Core insulation Silicone compound
Core identification Positive conductor: red
Negative conductor: green
Core layering Cores twisted together
Outer sheath Silicone compound, colour: green
Electrical properties
Limiting deviation class 2 ± 100 µV (± 2,5 °C) / m easuring point temperature +900 °C
Mechanical and thermal properties
Temperature range occasional flexing: -25 °C up t o +180 °C
Minimum bending radius occasional flexing: 12 x cable diameter
Flammability flame retardant in acc. to IEC 60332-1-2 resp. VDE 0482-332-1-2