User's Manual
Table Of Contents
- xPico Wi-Fi Embedded Device Server User Guide
- 1: Using This Guide
- 2: Introduction
- 3: Configuration Using Web Manager
- 4: Network Settings
- 5: Line and Tunnel Settings
- 6: Services Settings
- 7: Maintenance and Diagnostics Settings
- 8: Advanced Settings
- 9: Updating Firmware
- Appendix A: Technical Support
- Appendix B: Compliance
- Appendix C: Binary to Hexadecimal Conversions
6: Services Settings
xPico® Wi-Fi® Embedded Device Server User Guide 33
To Configure HTTP Access Control
Using Web Manager
To configure HTTP Access Control, click HTTP in the menu and select Access Control.
Using XML via CLI
Include in your file: <configgroup name = "HTTP Server Access Control"
instance=”1”>
Auth Type Select the authentication type:
None: no authentication is necessary.
Basic: encodes passwords using Base64.
Users Displays the username allowed to access the configured URI.
HTTP Access
Control Settings
(continued)
Description
PRELIMINARY DRAFT
PRELIMINARY DRAFT