User's Manual

5: Line and Tunnel Settings
xPico® Wi-Fi® Embedded Device Server User Guide 27
Using Web Manager
 To configure a specific line, click Line in the menu and select Line 1 -> Configuration
(Table 5-1).
Using XML via CLI
 Include in your file: <configgroup name = "Line" instance = "1">
To View Line Status
Using Web Manager
 To view statistics for a specific line, click Line in the menu and select Line 1 -> Status.
Using XML via CLI
 Include in your file: <statusgroup name = "Line" instance = "1">
Tunnel Settings
Tunneling allows serial devices to communicate over a network, without “being aware” of the
devices which establish the network connection between them. Tunneling parameters are
configured using the Tunnel menu and submenus. The Tunnel settings allow you to configure
how the Serial-Network tunneling operates. Tunneling is available only on Line 1.
Line Settings
These serial settings for the tunnel apply to the Serial Line interface. The Line Settings and
Protocol are displayed for informational purposes and must be configured from the Line settings.
Table 5-2 Tunnel Line Settings
To View Tunnel Serial Settings
Using Web Manager
 To view the Serial Settings for a specific tunnel, click Tunnel in the menu and select Tunnel 1
-> Line Settings.
Using XML via CLI
 Include in your file: <configgroup name = "Tunnel Line" instance = "1">
Tunnel Serial
Settings
Description
Line Settings Line Settings information here is display only. Go to the section, To Configure
Line Settings to modify these settings.
Protocol Protocol information here is display only. Go to the section, To Configure Line
Settings to modify these settings.
PRELIMINARY DRAFT
PRELIMINARY DRAFT