User's Manual

2: Introduction
xPico® Wi-Fi® Embedded Device Server User Guide 12
Troubleshooting Capabilities
The xPico Wi-Fi offers the abilty to view system log messages.
Configuration Methods
After installation, the xPico Wi-Fi embedded device server requires configuration. For the unit to
operate correctly on a network, it must have a unique IP address on the network. These methods
may be used for logging into the xPico Wi-Fi and assigning IP addresses and other configurable
settings:
 Web Manager: View and configure settings easily through a web browser using the Lantronix
Web Manager. See “Configuration Using Web Manager” on page 14.
 XML: The xPico Wi-Fi supports XML import and XML export through a terminal emulator
software such as Tera Term. See “XML Import and XML Export” on page 36.
Addresses and Port Numbers
Hardware Address
The hardware address is also referred to as the physical address or MAC address. Sample
hardware address:
 00-80-A3-FF-FF-FF
 00:80:A3:FF:FF:FF
IP Address
Every device connected to an IP network must have a unique IPv4 or IPv6 address. This address
references the specific unit.
Port Numbers
 TCP Port 80: HTTP Server (Web Manager configuration)
 TCP Port 10001: Tunnel
Product Information Label
The product information label on the unit contains the following information about the specific unit:
 Lantronix Datamatrix Code
 Product Revision
 Part Number
 Serial Number Hardware Address (MAC Address)
 Manufacturing Date Code
PRELIMINARY DRAFT
PRELIMINARY DRAFT