Quick Start Guide

SCANNING
AND PRINTING
Scanning
Printing
Note: If the scanner goes off, press the
back button to turn the scanner back on.
With SP500X mounted on hand,
aim the scanner laser at the
barcode you wish to scan.
SP500X should be positioned 5-10
inches away from the
desired barcode, at a twenty
degree angle.
When a valid barcode is scanned,
the SP500X will sound an
acceptance tone, indicating that
the device is ready to print.
20
Angle
5 - 10
Inches
When printing, the SP500X front end
should remain level with the print
surface until print is completed.
Do not tilt the printer forward
or backwards while printing.
[ [
06
Warning: Do No Stare Into Beam, Class 2 Laser Product.