Quick Start Guide
CONFIGURING WIFI
AND SERVER
There are two methods for conguring the WiFi and server settings.
The rst requires the use of the PC App, SP500X Controller.
Please refer to the SP500X Controller User Guide for this method.
To perform the second method, a valid conguration barcode and close
proximity to the appropriate access points are required.
01.
Using the SP500X keypad, navigate
to the “Server Conguration” item:
Menu > SP500X Tasks > Server Conguration
02.
Select “Server Conguration”.
The SP500X scanner light will turn on.
03.
Aim the scanner light at the conguration barcode. The light will turn off
once the barcode is read. Upon connection to the access point, the LCD
will display “SUCCESS.”
04.
The SP500X will reboot to update the server
and network settings.
05.
The SP500X is now ready to use*
*Note: In some user environments you may also need to login before use as
directed by your work environment. If so, please scan login barcode before
continuing to use.
Congure Via Barcode
05