User's Guide

Configuration via Serial Mode or Telnet Port
WiBox™ User Guide 72
 Lantronix Secure Com Port Redirector provides an encrypted connection
from Windows-based applications to the WiBox. Information about SCPR is
at http://www.lantronix.com/device-networking/software-services/scpr.html
A 30-day trial version of SCPR is included on the CD.
Default Settings
Select 7 Default Settings from the Change Setup menu to reset the unit’s Channel 1
configuration, Channel 2 configuration, and Expert settings to the factory default
settings. The server configuration settings for IP address, gateway IP address,
netmask, and WLAN remain unchanged. The specific settings that this option
changes are listed below:
Channel 1 Configuration CHECK THESE
Baudrate
9600
I/F Mode
4C (1 stop bit, no parity, 8 bit, RS-232C)
Port No
10001
Connect Mode C0 (always accept incoming connection; no active
connection startup)
Hostlist Retry Counter
3
Hostlist Retry Timeout
250 (msec)
Send Character
0x0D (CR)
All other parameters
0
Channel 2 Configuration
Baudrate
9600
I/F Mode
4C (1 stop bit, no parity, 8 bit, RS-232C)
Port No
10002
Connect Mode C0 (always accept incoming connection; no active
connection startup)
Hostlist Retry Counter
3
Hostlist Retry Timeout
250 (msec)
Send Character
0x0D (CR)
All other parameters
0
Expert Settings
TCP keepalive
45 (seconds)
ARP cache timeout
600 (seconds)
High CPU performance mode
Disabled