User's Guide

Configuration via Serial Mode or Telnet Port
WiBox™ User Guide 64
US=United States and Canada
FR=France
JP=Japan
OT=Others, such as Europe (excluding
France), Asia, Africa, and Australia
To modify WLAN settings, select 4 WLAN from the Change Setup menu.
Enable WLAN
Enable the Ethernet or the Wireless interface. When WLAN is enabled, the Ethernet
interface is disabled.
Enable WLAN (Y) ? _
Topology
Select Infrastructure or Adhoc. Infrastructure (ESS) mode communicates with
Access Points. Ad Hoc (IBSS) mode communicates only with other clients.
Topology 0=Infrastructure, 1=Adhoc (0) ?
Network Name (SSID)
Enter the name of the network to which the WiBox will connect.
Network name (LTRX_IBSS) ? _
Ad Hoc Network Creation Channel
When Adhoc mode is selected and the WiBox cannot find the specified network, it
creates one with that name by transmitting a beacon on the selected channel.
Channel (11) ?
Only channels allowed in the country for which the WiBox is designated can be
selected. The country displays in the settings overview.
Security
The WiBox features WEP and WPA to secure all wireless communication. If Adhoc
is selected as topology, only WEP is available
Security 0=none, 1=WEP, 2=WPA (0) ? _
WEP
Authentication 0=open/none, 1=shared (0) ? _
Encryption 0=WEP64, 1=WPE128 (0) ?
Display current key (N) ?
Change key (N) ?
Key type 0=hex, 1=passphrase (0) ?
Enter key:
Authentication selects whether the encryption keys are matched (1 = shared) with
those of the communication partner before passing through messages or not
(2 = open/none).
The Encryption prompt requests the length of the encryption key and the security
strength. WEP64 is 5 bytes or 40 bits (option 0). WEP128 is 13 bytes or 104 bits
(option 1).