User's Guide

Contents
WiBox™ User Guide 4
Server Configuration ____________________________________________________31
Hostlist Configuration ___________________________________________________32
Channel 1 and Channel 2 Configuration _____________________________________33
Serial Settings ______________________________________________________________33
Connection Settings - TCP ____________________________________________________36
Connection Settings - UDP ____________________________________________________38
WLAN Configuration ____________________________________________________40
Updating Settings ______________________________________________________42
Apply Defaults _________________________________________________________43
Channel 1 Configuration ______________________________________________________43
Channel 2 Configuration ______________________________________________________43
Expert Settings _____________________________________________________________43
Security Settings ____________________________________________________________44
5: Telnet or Serial Port (Setup Mode) Configuration 45
Accessing Setup Mode __________________________________________________45
Telnet Connection ___________________________________________________________45
Serial Port Connection _______________________________________________________46
Exiting Setup Mode _____________________________________________________46
6: Setup Mode: Server Configuration 47
Server Configuration (Option 0)____________________________________________47
Network Mode ______________________________________________________________47
IP Address____________________________________________________________47
Set Gateway IP Address _________________________________________________48
Netmask: Number of Bits for Host Part ______________________________________48
Change Telnet Configuration Password _____________________________________48
DHCP Name __________________________________________________________48
7: Setup Mode: Channel Configuration 50
Channel 1 (Option 1) ____________________________________________________50
Baudrate _____________________________________________________________50
I/F (Interface) Mode _____________________________________________________51
Flow_________________________________________________________________51
Port Number __________________________________________________________52
Connect Mode _________________________________________________________52
a) Incoming Connection ______________________________________________________53
b) Response _______________________________________________________________54
c) Active Startup ____________________________________________________________54
d) Datagram Type ___________________________________________________________56
e) Modem Mode ____________________________________________________________57
Send the Escape Sequence (+++) in Modem Mode ____________________________59
Auto Increment Source Port ______________________________________________59
Remote IP Address _____________________________________________________59
Remote Port __________________________________________________________60
DisConnMode _________________________________________________________60
Flush Mode (Buffer Flushing) _____________________________________________61
Pack Control __________________________________________________________61