User's Guide

Web-Manager Configuration
WiBox™ User Guide 29
The main menu is on the left panel of the Web-Manager window.
Network Configuration
The unit’s network values display upon selecting Network from the main menu. The
following sections describe the configurable parameters within the Network
configuration menu.
Note: If the IP address is assigned via DHCP, its DHCP settings are not
displayed.
Figure 4-2. Network Settings NEED NEW SCREEN SHOT
Automatic IP Address Configuration
To automatically assign an IP address and its network configuration:
1. Click Network from the main menu.
2. Select Obtain IP address automatically.
3. Enter the following (as necessary):
BOOTP
Select Enable to permit the Bootstrap Protocol (BOOTP). The
BOOTP server automatically assigns the IP address from a
pool of addresses.
DHCP
Select Enable to permit Dynamic Host Configuration Protocol
(DHCP). DHCP automatically assigns a leased IP address to
the WiBox unit.
Auto-IP The WiBox generates an IP in the 169.254.x.x address range
with a Class B subnet
Select the
Disable
checkbox to d
isable