User's Guide

Quick Start
WiBox™ User Guide 26
Extended Firmware
Version
Displays the firmware currently installed on the WiBox.
Online Status Displays the WiBox’s status as online, offline, unreachable
(the WiBox is on a different subnet), or busy (the WiBox is
currently performing a task).
Telnet Enabled Displays True if the unit can be accessed using Telnet.
Telnet Port
Displays the unit's port for Telnet sessions.
Web Enabled
Displays True if the unit can be accessed using Web-
Manager.
WebPort
Displays the WiBox’s port for Web-Manager configuration.
Maximum Baud Rate
Supported
Displays the WiBox’s maximum baud rate. Note: The WiBox
may not currently be running at this rate.
Firmware Upgradeable
Displays True, indicating the WiBox’s firmware is upgradeable
as newer version become available.
IP Address Displays the WiBox’s current IP address. To change the IP
address, click the Assign IP Address button.
Number of COB
partitions supported
Displays the number of COB partitions supported (between 19
and 59).
DynamicIP Indicates whether the current IP address was set using static
or DHCP.
Subnet Mask Displays the WiBox’s current subnet mask. To change the
subnet mask, click the Assign IP Address button.
Gateway Displays the WiBox’s current gateway. To change the
gateway, click the Assign IP Address button.
Number of Ports
Displays the number of ports on the WiBox.
TCP Keepalive valid
range
Displays 45, the WiBox’s TCP keepalive range.
Supports Configurable
Pins
False
Supports Email Triggers
False
Supports AES Data
Stream
WiBox unit supports AES encryption.
Supports 485
WiBox supports the RS-485 protocol.
Supports 920K Baudrate
WiBox supports baud rates up to 920K.
Supports Wired Ethernet
WBX2100E supports wired Ethernet.