User's Manual
Table Of Contents
- Labeling of the End Product
- Integration Note
- Using This Guide
- Introduction
- Configuration Using DeviceInstaller
- Server Configuration
- WLAN Configuration
- Host List Configuration
- OEM Pin Configuration
- Channel 1 and Channel 2 Configuration
- Email Configuration
- Accessing WiPort using Web-Manager
- Host List Configuration
- Channel 1 and Channel 2 Configuration
- Email Configuration
- WLAN Configuration
- OEM Pin Configuration
- Updating Settings
- Configuration via Serial Mode or Telnet Port
- Configurable Pins
- Monitor Mode
- Updating Firmware
- Troubleshooting
WiPort™ User Guide 61
Email Settings
Trigger Priority
L
Min. notification interval
1 second
All other parameters
0 (e.g. Email notification and triggers are disabled)
Exit Configuration Mode
To exit setup mode:
Select option 9 Save and exit from the Change Setup menu to save all
changes and reboot the device. All values are stored in nonvolatile memory.
or
Select option 8 Exit without save from the Change Setup menu to exit the
configuration mode without saving any changes or rebooting,