User's Manual

WiPort™ User Guide 55
The Re-notification interval indicates the time interval in which a new Email
message is sent to the recipient(s) when a single trigger event remains active.
Trigger 2
Refer to Trigger 1 for details on completing these fields.
Note: Each trigger is independent of the others. Each condition within an
individual trigger must be met before the unit will send the Email.
Trigger 3
Refer to Trigger 1 for details on completing these fields.
Note: Each trigger is independent of the others. Each condition within an
individual trigger must be met before the unit will send the Email.
WLAN Settings
Without adequate protection, a wireless LAN is susceptible to access by
unauthorized users. As such, WiPort includes the Wired Equivalent Privacy (WEP)
encryption standard as an additional means of security.
To modify WLAN and WEP settings, select 4 WLAN from the Change Setup menu.
Enable WLAN
The current value is displayed in parentheses. By default, WLAN is enabled on
WiPort.
Enable WLAN (Y) ? _
Find Network Name
Displays when WLAN is enabled. Enter the name of the network in which the WiPort
unit resides. The current value is displayed in parentheses.
Find network name (LTRX_IBSS) ? _
Enable Ad Hoc Network Creation
Displays when WLAN is enabled. The current value is displayed in parentheses. By
default, Ad Hoc network creation is enabled on WiPort.
Enable Ad Hoc network creation (Y) ?
Name (LTRX_IBSS) ?
Country 0=US, 1=FR, 2=JP, 3=Other (0) ?
Channel (11) ?
Enter Y to enable Ad Hoc network creation and display configurable parameters:
1. At the Name prompt, enter the network name as text and hit Enter. The default
name displays in parentheses.
2. Select a Country by entering 0, 1, or 3. By default, 0 (United States) is selected.
Press Enter.
3. At the Channel prompt, enter the WiPort’s channel setting.