User's Manual
Table Of Contents
- Labeling of the End Product
- Integration Note
- Using This Guide
- Introduction
- Configuration Using DeviceInstaller
- Server Configuration
- WLAN Configuration
- Host List Configuration
- OEM Pin Configuration
- Channel 1 and Channel 2 Configuration
- Email Configuration
- Accessing WiPort using Web-Manager
- Host List Configuration
- Channel 1 and Channel 2 Configuration
- Email Configuration
- WLAN Configuration
- OEM Pin Configuration
- Updating Settings
- Configuration via Serial Mode or Telnet Port
- Configurable Pins
- Monitor Mode
- Updating Firmware
- Troubleshooting
Configuration using Web-Manager
WiPortâ„¢ User Guide 33
Channel
Select the channel prompting the trigger.
Data Size
Select the data size prompting the trigger.
Match Data Enter the data which, when appears in the communication
stream, prompts a trigger.
Note: All of the conditions must match for an email notification to be sent.
Message Properties
Message The subject line of the trigger event email to the specified
recipient(s).
Priority
The priority level for the e-mail.
Notification Interval The notification interval is the minimum time allowed between
individual triggers. If a trigger event occurs within the
minimum interval since the last trigger, it is ignored.
Re-notification Interval Indicates the time interval in which a new email message is
sent to the recipient(s) when a single trigger event remains
active.
WLAN Configuration
Without adequate protection, a wireless LAN is susceptible to access by
unauthorized users. As such, WiPort includes the Wired Equivalent Privacy (WEP)
encryption standard as an additional means of security.
To configure the WiPort’s WLAN settings:
1. Select WLAN from the main menu to open the WLAN Settings window.