User's Manual

WiPort™ User Guide 8
1
1
:
:
U
U
s
s
i
i
n
n
g
g
T
T
h
h
i
i
s
s
G
G
u
u
i
i
d
d
e
e
Purpose and Audience
This guide provides the information needed to configure, use and update the
WiPort
TM
and is intended for software developers and system integrators who are
embedding the WiPort in their designs. This User Guide covers WiPort Device
Server versions WP2001000-01, WP2002000-01, WP2004000-01 (WiPort-485), and
WP2001000G-02 (WiPort-G).
Note: For the WiPort model WP2001000M-02, additional information can be found in
the Modbus Protocol User Guide located at
www.lantronix.com/support/documentation.html .
Chapter Summary
The remaining chapters in this guide include:
Introduction
Describes the main features of the WiPort and the protocols it
supports.
Using DeviceInstaller
Provides information for viewing the WiPort’s configuration using
DeviceInstaller.
Configuration Using Web-
Manager
Details configuration using the Web-Manager to set parameters
such as port and server properties.
Configuration via Serial Mode or
Telnet Port
Provides instructions for accessing Setup Mode (command line
interface) using a Telnet connection through the network or a
terminal or terminal emulation program through the serial port.
Details the parameters that you must configure.
Configurable Pins
Provides instructions for configuring the eleven General Purpose
I/O pins.
Monitor Mode
Provides instructions for accessing and using the command line
interface for monitoring the network and diagnosing problems.
Updating Firmware
Provides instructions for obtaining the latest firmware and updating
the WiPort.
Troubleshooting
Describes common problems and error messages and how to
contact Lantronix Technical Support. Also provides information on
diagnostic LEDs.