User's Manual

Configuration Using Web-Manager
WiPort™ User Guide 34
system default during bootup. Used when network access is
impossible on account of improper configuration.
RS-485 Select out Selects between RS-232 and RS-485 line drivers. Applies to
WiPort-485 only.
RS-485 2 Wire out Selects 2-wire line drivers. Usable as a half/full duplex
selector. Applies to WiPort-485 only.
RS-422/485 4 Wire out
Selects 4-wire line drivers. Applies to WiPort-485 only.
Updating Settings
Click the Apply Settings button from the main menu to save and apply the
configuration changes.
Applying Factory Default Settings?
Click the Apply Factory Defaults? button from the main menu to apply the factory
settings to the WiPort. For a list of the default settings, refer to Default Settings on
page 61.