User's Manual

Configuration Using Web-Manager

WiPort™ User Guide 33

Figure 4-11. Configurable Pins Settings

2. Configure or modify the following fields for each pin:

Function From the pull down menu, select the purpose of the specified

pin. See Configurable Pin Functions for a description of each

available function.

Active Level Select the signal active level (Low or High).

Direction

Select whether the pin inputs or outputs.

Configurable Pin Functions

General Purpose I/O Monitors input via the 77F0 port or controls output by the 77F0

port.

Modem Ctrl in, chan 1 Allows for control of the connection (and disconnection) of

channel 1.

Modem Ctrl out, chan 1

Indicates a connection is established on channel 1.

Modem Ctrl in, chan 2 Allows for control of the connection (and disconnection) on

channel 2.

Modem Ctrl out, chan 2

Indicates a connection is established on channel 2.

Serial Status LED out,

chan 1

Indicates channel 1 status and extended diagnostics when the

Diagnostics LED is lit.

Serial Status LED out,

chan 2

Indicates channel 2 status.

Diagnostics LED out

Indicates errors and configurations.

Reset to Defaults in Allows the external si

nal to reset the confi

uration back to