User's Manual

Configuration Using Web-Manager
WiPort™ User Guide 32
string if Passphrase is selected as the Key Type. Passphrase
input is not the same as ASCII input
Advanced Settings
Data Rate WiPort permits the control of the data transmission rate. Click
the Auto check box to allow the WiPort to automatically set
the data rate (or leave unchecked to manually set the
transmission rate). The default rate is 11 Mbps.
If the Auto check box is selected, choose the data rate from
the drop down menu. This is the WiPort’s maximum data rate.
If the Auto check box was not selected, select the data rate
(in Mbps) from the drop down menu. This is the WiPort’s fixed
rate.
Note: For WiPort version WP2001000G-02 (WiPort-G), the
maximum data rate cannot be selected when the WiPort
automatically sets the data rate. WiPort-G supports the
following additional rates: 18 Mbps, 24 Mbps, 36 Mbps, and
54 Mbps.
Radio Power
Management
Power management reduces the overall power consumption
of the WiPort unit. Selecting Enable increases the response
time.
TX Power Level Note: Available on WiPort version WP2001000G-02 (WiPort-
G).
Select the transmission power level from the drop down menu.
Higher values span a wider range. The default is 18 dBm.
Configurable Pin Settings
There are 11 configurable hardware pins on the WiPort unit. For each pin, configure
the pin function, communication direction, and its activity level. For more information,
see Configurable Pins on page 64.
To configure the WiPort’s OEM Configurable Pins:
1. Click Configurable Pins from the main menu to open the Configurable Pins
window.