User's Manual

Configuration Using Web-Manager
WiPort™ User Guide 29
Figure 4-9. Email Trigger Settings
2. Configure the following fields:
Conditions
Configurable Pins Select the condition from the pull down menu for the
configurable pins. Repeat for each Trigger Input field.
Enable Serial Trigger
Input
When selected, specified serial communications count as a
trigger input.
Channel
Select the channel prompting the trigger.
Data Size
Select the data size prompting the trigger.
Match Data Enter the data which, when appears in the communication
stream, prompts a trigger.
Note: All of the conditions must match for an email notification to be sent.
Message Properties
Message The subject line of the trigger event email to the specified
recipient(s).
Priority
The priority level for the e-mail.
Notification Interval The notification interval is the minimum time allowed between
individual triggers. If a trigger event occurs within the
minimum interval since the last trigger, it is ignored.
Re-notification Interval Indicates the time interval in which a new email message is
sent to the recipient(s) when a single trigger event remains
active.
WLAN Configuration
Without adequate protection, a wireless LAN is susceptible to access by
unauthorized users.
To configure the WiPort’s WLAN settings: