User's Manual

Configuration Using Web-Manager
WiPort™ User Guide 28
a trigger. Each trigger is independent of the others. Each condition within an
individual trigger must be met before the unit will send the Email.
To configure the WiPort’s email settings:
1. From the main menu, select Email to open the Email Settings window.
Figure 4-8. Email Settings
2. Configure the following fields:
Server IP Address
Enter the IP address of the mail server.
Domain Name
Enter the Email server’s domain name.
Unit Name Enter the username used by the WiPort to send Email
messages.
Recipients
Recipient 1: Email
Address
Enter the email address designated to receive email
notifications.
Recipient 2: Email
Address
Enter an additional email address designated to receive email
notifications.
Trigger Configuration
A trigger event occurs when the unit receives the specified trigger input as a result of
a specified combination of conditions on the configurable pins.
Set the configurable pins to Active, Inactive, or None. The configurable pins are
disabled if they are all set to None. If both the serial sequence and the configurable
pins are disabled, the trigger is disabled.
To configure the WiPort’s email trigger settings:
1. From the main menu, select Trigger 1, Trigger 2, or Trigger 3 to configure the
desired Trigger settings. The Email Trigger Settings page opens.