User's Manual
Configuration Using Web-Manager
WiPortâ„¢ User Guide 23
With Passive Connect
Select Yes to clear the input buffer with a connection initiated
from the network to the device.
At Time of Disconnect
Select Yes to clear the input buffer when the network
connection to or from the device is disconnected.
Flush Output Buffer (Network to Serial)
With Active Connect
Select Yes to clear the output buffer with a connection that is
initiated from the device to the network.
With Passive Connect
Select Yes to clear the output buffer with a connection initiated
from the network to the device.
At Time of Disconnect
Select Yes to clear the output buffer when the network
connection to or from the device is disconnected.
Connection Settings - TCP
To configure a channel’s TCP settings:
1. From the main menu, click Connection for either Channel 1 or Channel 2 to
display the Connection Settings page for the selected channel.
2. In the available fields, enter the following information:
Connect Protocol
Protocol Select TCP from the pull down menu.