User Manual

Firmware
Status Meaning
DISABLED Unused port on your system
N/A Port being used by other hardware / software on your system
IDLE An IP address and port number have been associated with the COM port
CONNECTED An active TCP/IP connection exists between the COM port and the device server
3. Select one of the DISABLED ports by clicking on it, and then press the Edit button.
4. Select the Enabled check box.
5. Type in the IP address of the target device server in the “Host:” section.
6. Enter the Port number of the target device server in the “Port:” section. Click OK when
done.
****Please Note:****
Because this is a raw mode redirector:
UDS-10 User Guide 5-3