UBox USB Device Server User Guide UBX4100
Table Of Contents
- Contents
- Using This Guide
- Introduction
- Installing the UBox
- Using USB Devices on the Network
- Changing the UBox's Settings
- Overview
- Viewing UBox Settings
- Editing Server Settings: Access Tab
- Editing Server Settings: Network Tab
- Editing Server Settings: USB Device Configuration Tab
- Applying, Canceling, or Removing Server Settings
- Restoring Default Settings
- Updating the UBox's Firmware
- Overriding Server Network Settings
- Refreshing Data
- Changing Local Software Settings
- Troubleshooting
- Status Light Behavior
- Configuring the Windows XP Firewall
- Compliance
- Lantronix Software License Agreement
- Lantronix Warranty
5: Changing the UBox's Settings
Overview
The Lantronix UBox comes pre-configured for use with most networks. However, you
may want to change some of the settings for your specific ne
twork or USB device-
sharing needs. This chapter describes how to change the UBox's settings and what
the settings affect.
Note: To modify settings for the UBox software, use the Local Settings tab.
These settings are kept on your computer. See 6: Changing Local Software
Settings.
Viewing UBox Settings
To view current settings:
1. From the Start menu, click Programs-->Lantronix UBox. The USB Devices tab
displays.
2. Click the Servers tab. The tab displays all of the UBoxes the software finds.
UBox User Guide 29